High Alumina Insulation Brick Introduction
High alumina insulating bricks are made of selected high alumina bauxite, kaolin clay, and hollow microsphere, high alumina insulation bricks are produced by shaping at high pressure and sintering at high temperature. Lightweight high alumina brick has the characteristics of low bulk density, maximum service temperature is 1350C, high cold crushing strength, low thermal conductivity. High alumina insulation brick can be used in furnace lining and insulation layers, ceramic tunnel kiln, heating furnace and coking furnace in iron and steel industry.
High Alumina Insulation Brick Properties
1. Low bulk density;
2. High cold crushing strength
3. Lowest thermal conductivity.
High Alumina Insulation Brick Physical & Chemical Index
item index | RSQG-1.0 |
Bulk density(g/cm2) | ≥ 1.0 |
Compressive strength (normal temperature/ MPa) | ≥ 3.5 |
Thermal conductivity (900℃±25)(W/m •k) | ≤0.40 |
Bulk density (g/cm3) | 0.4-1.35 |
refractoriness | 1750-1790℃ |
High Alumina Insulation Brick Application
The light weight high alumina bricks are used for the liner and thermal protective coating, and the parts which have no erosion and erode of high temperature melting material, when directly contact with the fire, the surface contact temperature can not exceed 1350 ℃.
1. Furnace lining and insulation layers
2. Ceramic tunnel kiln
3. Heating furnace
4. Coking furnace in iron and steel industry.
High Alumina Insulation Brick Manufacturer
RS refractory manufacturer is specialized in producing and selling insulation refractory materials. Our main products including high alumina bricks, anti-stripping high alumina bricks, low creep high alumina bricks, light weight high alumina bricks, fireclay refractory bricks, etc. And our products have been sold to many countries and get good feedback.